When printing from AS-400 you will want to double check these two settings before printing;

1) Non-Standard (only If you are using SBPL, UNCHECK the box marked ‘Standard Code’ below).

Figure 1: Display setting(left), web setting(right).

2)LPD should checked under the Interfaces section on the CL4NX.

Figure 2: Services>LPD display setting(left), web setting(right).

Both Settings can be changed via the browser interface once the printer is setup on the network, or you can set them up on the front panel. These settings also work via the AIOT(All-In-One Tool).